RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder
RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder
RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder
RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder
RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder

RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder (RFGT5440072)

Brand : RFgate
Price : $450.00  + VAT
Integrated Reader combines an RFID Reader and an RFID Antenna into a single device and can also support additional external RFID Antennas. It is a great way to quickly start an RFID project. An RFID Reader is a radio frequency transmitter and receiver that can read and write to an RFID tag.

 

RFGATE Industrial UHF RFID Device – RGR6909T Integrated Reader and Encoder

 

  • RFGate has achieved peak read/write performance using the EPCglobal Class 1 Gen 2 (ISO/IEC 18000-6C) protocol.

  • Operates in the 860–868 MHz frequency range.
  • Operates between -40°C and +70°C.
  • Low power consumption principle for both reading and encoding.

 

   

 

Feature Description
Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Operating Frequency 865–868 MHz and 902–928 MHz
Maximum Reading Distance 3–5 meters
Thickness 78 mm
Dimensions 260 × 260 mm
Operating Humidity 95% @ 25°C
Operating Temperature -40°C to +60°C

 



Not suitable for direct use by end users without technical knowledge or appropriate equipment.

Blog Post

RFID Parking Access System (HGS–OGS)

Known on highways as HGS, this system entered our lives thanks to the RFID parking system. It consists of three main components: reader, tag, and antenna. It operates by transmitting vehicle and driver information via UHF RFID Tags placed on windshields or license plates. RFID tags act as data storage units. Communication between the tag and the reader is established through antennas. Costs can be reduced slightly with integrated RFID readers.

Antennas are permitted to communicate within the 868.6–868.7 MHz range according to European Union standards, and in our country, frequency regulation in compliance with EU standards has been established under the KET directive.

 

License Plate Recognition System

 

This system is essentially the integration of a camera and developed software with a barrier. The type of camera is important, but the crucial component here is the software. The moving images captured by the camera are matched via the software, which then sends a command to open the barrier for the authorized license plate. It has a significantly lower cost compared to RFID systems, but considering environmental factors, it becomes highly disadvantageous. In bad weather, during nighttime, if shadows fall on the plate, or if the plate is dirty, the system may not function correctly. Therefore, RFID systems are much more commonly preferred.

cultureSettings.RegionId: 0 cultureSettings.LanguageCode: EN
Çerez Kullanımı

We use cookies on our site to offer you the best shopping experience. You can review the Kvkk agreement for detailed information.